Brazed Natural Diamond CBN and Diamond Mandrels
- The aggressive and free cutting nature of plated mounted points enable their use in dry grinding.
- The use of a coolant (if possible) will prolong tool life.
- Wide Range of Materials can be Ground
DIAMOND APPLICATIONS
- Beryllium, Ceramics, Carbides, Carbon, Crystals, Plasma Coatings
CBN APPLICATIONS
- Alloy Steels, Ferrous PM, HS Steels, Iron Nickel Superalloys, Stainless Steels, Tool Steels.
Part Numbers:
| 1/8" Shank 2 1/4" O.A.L. | |||||
| Cat # | Head Dia. (D") | Head Length (H") | Neck Length (L") | Grit Size | |
| MP10020 | .020 | 1/16 | 1/8 | 270 | |
| MP10025 | .025 | 3/32 | 3/16 | 220 | |
| MP10030 | .030 | 3/32 | 1/4 | 150 | |
| MP10035 | .035 | 3/32 | 1/4 | 150 | |
| MP10040 | .040 | 1/8 | 1/4 | 150 | |
| MP10045 | .045 | 1/8 | 1/4 | 150 | |
| MP10050 | .050 | 1/8 | 1/2 | 100 | |
| MP10060 | .060 | 1/8 | 1/2 | 100 | |
| MP10070 | .070 | 5/32 | 1/2 | 100 | |
| MP10080 | .080 | 5/32 | 1/2 | 100 | |
| MP10090 | .090 | 5/32 | 1/2 | 100 | |
| MP10100 | .100 | 5/32 | 1/2 | 100 | |
| MP10110 | .110 | 5/32 | 1/2 | 100 | |
| MP10125 | .125 | 5/32 | 1/2 | 100 | |
| MP10130 | .130 | 5/32 | 1/2 | 100 | |
| MP10140 | .140 | 1/4 | - | 100 | |
| MP10156 | .156 | 1/4 | - | 100 | |
| MP10177 | .177 | 1/4 | - | 100 | |
| MP10187 | .187 | 1/4 | - | 100 | |
| MP10250 | .250 | 1/4 | - | 100 | |
| Solid Drill 1/8" Shank 1 1/2" O.A.L. | |||||
| Cat # | Head Dia. (D") | Head Length (H") | Neck Length (L") | Grit Size | |
| SD10020 | .020 | 1/16 | 1/8 | 270 | |
| SD10025 | .025 | 1/16 | 1/8 | 220 | |
| SD10030 | .030 | 3/32 | 5/32 | 150 | |
| SD10035 | .035 | 3/32 | 3/16 | 150 | |
| SD10040 | .040 | 3/32 | 3/16 | 150 | |
| SD10045 | .045 | 3/32 | 3/16 | 100 | |
| SD10050 | .050 | 1/8 | 1/4 | 100 | |
| 1/4" Shank 3" O.A.L. | |||||
| Cat # | Head Dia. (D") | Head Length (H") | Neck Length (L") | Grit Size | |
| MP20187 | .187 | 1/4 | 1 | 100 | |
| MP20230 | .230 | 1/4 | 1 | 100 | |
| MP20250 | .250 | 1/4 | 1 | 100 | |
| MP20275 | .275 | 1/4 | - | 100 | |
| MP20312 | .312 | 3/8 | - | 100 | |
| MP20375 | .375 | 3/8 | - | 100 | |
| MP20436 | .436 | 3/8 | - | 100 | |
| MP20500 | .500 | 3/8 | - | 100 | |
| 3/8" Shank 3 1/2" O.A.L. | ||||
| Cat # | Head Dia. (D") | Head Length (H") | Grit Size | |
| MP30406 | .406 | 3/8 | 100 | |
| MP30500 | .500 | 3/8 | 100 | |
| MP30562 | .562 | 3/8 | 100 | |
| MP30625 | .625 | 3/8 | 100 | |
| MP30750 | .750 | 1/2 | 100 | |
| MP31000 | 1.000 | 1/2 | 100 | |
| Bottom Grind Mandrels 3" O.A.L. | |||||
| Cat # | Head Dia. (D") | Head Length (H") | Shank Dia. (S") | Grit Size | |
| BG40312 | .312 | .312 | 1/4 | 60 | |
| BG40375 | .375 | .375 | 1/4 | 60 | |
| BG40437 | .437 | .375 | 3/8 | 60 | |
| BG40500 | .500 | .375 | 3/8 | 60 | |
| BG40625 | .625 | .375 | 1/2 | 60 | |
| BG40750 | .750 | .375 | 1/2 | 60 | |